Flow Velocity Air and Liquid level Sensor Installation Method
In this Article we are going to discuss about Flow Velocity Air and Liquid level Sensor Installation Method , this is Sensor's Installation Methods video series part 3 General notes for all sensors Do not install sensors so that they protrude in any direction, and do not suspend them below the horizontal. Ensure that they are protected against damage and vandalism and will not cause injury. Be aware of the effects of orientation on the functioning of the sensor. Always determine the following before mounting: Minimum or maximum ambient Temperature Ambient humidity and exposure to spray water Exposure to vibration Explosion protection External influences Take account of the active and inactive sections of a sensor probe. A tight-sealing test-hole must be provided adjacent to every sensor. The cable should be installed with a drip loop to prevent water from entering the sensor housing. If the sensors are to be concealed ( e.g. in false ceilings, shafts etc.)...