TREND IQ3-XCITE I/O MODULES TYPES


In this article, we are going to discuss Trend Control Systems IQ3-Xcite I/O Module types and specifications.


TREND SYSTEM supports different types of Inputs and Outputs.

  • Digital Inputs (DI),
  • Digital Outputs (DO),
  • Analogue Inputs (AI),
  • Analogue Outputs (AO),
  • Universal Inputs (UI),
  • Thermistor Inputs (TI),

I/O Modules:

  • The main features of an I/O module are similar to those of the IQ3, however the I/O terminals are protected by clear poly-carbonate flip up safety covers.
TREND IQ3-XCITE I/O MODULES

Upper and lower channel covers:

  • These are similar to the input channel links cover of the IQ3 main controller. 
  • They are removed and replaced in the same way.

I/O bus connector cover:

  • The I/O module has 2 flip up I/O bus connector covers similar to the one on the IQ3 main controller, enabling daisy chaining of the I/O bus by the I/O modules.

DIN rail fixings:

  • Similar to the main controller only the I/O modules are the same height but about half the width (width main controller: 263 mm, I/O module 120 mm).

Types:

  • There are 13 types of I/O modules available in Xcite models.
  • Note that some channel numbers are non-sequential. e.g. 2UI/2AO has channels 1, 2, and 5, 6 (gap of 3, 4 unused).
  • This enables a 4 channel unit to be changed for an 8 channel without changing channel numbers (e.g. upgrade 2UI/2AO to 4UI/4AO).
TREND IQ3-XCITE I/O MODULES

  • Each module has an address switch to define its address on the I/O bus.
  • There are 3 LED indicators similar to the main controller status set.

 4-CHANNELS:

4 Relay Outputs

XCITE/IO/4DO:

XCITE/IO/4DO
XCITE/IO/4DO

  • 4-Digital Outputs,
  • 4-Digital Outputs LED's (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • This module has an in-built address selection switch,
  • DIN rail mounting,

XCITE/IO/4UI:

XCITE/IO/4UI
XCITE/IO/4UI

  • 4-Universal Inputs,
  • 4-Digital Inputs LED's (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • Module has Screen Earth Link,
  • Module has Input Links,
  • This module has an in-built address selection switch,
  • DIN rail mounting,


4 Analogue Outputs


XCITE/IO/4AO:

XCITE/IO/4AO
XCITE/IO/4AO

  • 4-Digital Outputs,
  • Hand, Off, Auto switches,
  • 4-digital output status LEDs (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LEDs,
  • This module has an in-built address selection switch,
  • Excess Aux. Current LEDs (red),
  • DIN rail mounting,


XCITE/IO/2UI/2AO:

XCITE/IO/2UI/2AO
XCITE/IO/2UI/2AO
  • 2 Universal Inputs, 2 Analogue Outputs,
  • 2-digital input LEDs (yellow),
  • 2-output LEDs (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LEDs,
  • Module has Screen Earth Link,
  • Module has Input Links,
  • This module has an in-built address selection switch,
  • DIN rail mounting,

4 Relay Outputs Hand/Off/Auto


XCITE/IO/4DO/HOA:

XCITE/IO/4DO/HOA
XCITE/IO/4DO/HOA

  • 4-Digital Outputs Hand/Off/Auto,
  • Hand, Off, Auto switches,
  • 4-digital output status LED's (yellow),
  • Override LED's (red),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LEDs,
  • DIN rail mounting,
  • This module has an in-built address selection switch,

 

8-CHANNELS:

TREND IQ3-XCITE I/O MODULES


XCITE/IO/8DI:

XCITE/IO/8DI
XCITE/IO/8DI

  • 8-Digital Inputs,
  • 8-Digital Inputs LED's (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • Input Polarity Error LED's (red),
  • This module has an in-built address selection switch,
  • DIN rail mounting,

 

XCITE/IO/8UI:

XCITE/IO/8UI
XCITE/IO/8UI

  • 8 Universal Inputs,
  • 8-Digital Inputs LED's (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • Module has Screen Earth Link,
  • Module has Input Links,
  • DIN rail mounting,
  • This module has an in-built address selection switch,

 

TREND IQ3-XCITE I/O MODULES

XCITE/IO/4UI/4AO:

XCITE/IO/4UI/4AO
XCITE/IO/4UI/4AO

  • 4 Universal Inputs, 4 Analogue Outputs,
  • 4-Digital input LED's (yellow),
  • 4-Output LED's (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • Module has Screen Earth Link,
  • Module has Input Links,
  • This module has an in-built address selection switch,
  • DIN rail mounting,

 

XCITE/IO/8AO:

XCITE/IO/8AO
XCITE/IO/8AO

  • 8 Analogue Outputs,
  • 8-Analog Output LED's (yellow)
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • Excess Aux. Current LED's (red),
  • This module has an in-built address selection switch,
  • DIN rail mounting,

 

TREND IQ3-XCITE I/O MODULES

XCITE/IO/8DO:

XCITE/IO/8DO
XCITE/IO/8DO

  • 8-Digital Outputs,
  • 8-Digital Outputs LED's (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • DIN rail mounting,
  • This module has an in-built address selection switch,


XCITE/IO/8DO/HOA:

XCITE/IO/8DO/HOA
XCITE/IO/8DO/HOA

  • 8-Digital Outputs Hand/Off/Auto,
  • Hand, Off, Auto switches,
  • 8-Digital Outputs LED's (yellow),
  • Override LED's (red),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • This module has an in-built address selection switch,
  • DIN rail mounting,

 

16-CHANNELS:

TREND IQ3-XCITE I/O MODULES


XCITE/IO/16DI:

XCITE/IO/16DI
XCITE/IO/16DI

  • 16-Digital Inputs,
  • 16-Digital Inputs LED's (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • Input Polarity Error LED's (red),
  • This module has an in-built address selection switch,
  • DIN rail mounting,

 

XCITE/IO/8DI/8TI:

XCITE/IO/8DI/8TI
XCITE/IO/8DI/8TI

  • 8-Digital Inputs, 8-Thermistor Inputs,
  • 8-Digital Inputs LED's (yellow),
  • 8-Thermistor Inputs LED's (yellow),
  • The I/O module has 2 flip up I/O bus connector covers,
  • 3-LED indicators similar to the main controller status set,
  • This module includes a power supply, I/O bus, and watchdog LED's,
  • Input Polarity Error LED's (red)
  • This module has an in-built address selection switch,
  • DIN rail mounting,


Related Post Link:

1. TREND 2VID/24 volt acDual Voltage to Current Driver Module

2. TREND3RM/24 Volt ac Three Relay Module (24 Volt ac/dc) Overview

3. TREND SRMV, SRMAC SingleRelay Module


Related Video Link:

1. IQ4E TREND CONTROLLER

2. TREND 8DO IO ModuleComplete Operation Part 1

3. TREND IQ3 XCITE96 PLC Controller

4. TREND CONTROL SYSTEMS PLC & OTHER PRODUCTS

5. TREND CONTROL SYSTEMS COURSE & SOFTWARES

 

Social Media Link: 

        


Will i hope this Article is useful to you, thank you for Visiting our Blog, Have a great day.

 


Comments

Post a Comment

Popular posts from this blog

QElectro Tech Software Overview

Image
  In This Article we are going to see QElectro Tech Software Overview... QElectro Tech QElectroTech QElectroTech is a free software to create electric diagrams. QElectroTech or QET in short is currently available in version 0.80. This Software is Very Effective and Very Useful for Electronic, Electrical, and Instrumentation Department Engineers. Compare to other Diagram Software’s ‘exe’ Setup file of QElectro Tech Software Size is Too Low. There are Lot of Electrical, Electronic and Instrumentation Symbols and elements are in this QElectro Tech software. The Software of Table of Contents is following of ( Basics , Interface , Preferences , Project , Folio , Element , Conductor , Schema , Drawing , Reports , Export and print , Annex etc..) QElectro Tech Documentation 1 QElectro Tech Documentation 2 The QElectro Tech Software contains many collections (Electrical , Logic , Hydraulic , Pneumatic and Energy symbols and Elements) also user can create they own symbols. Anyone can Access
Read More »

Danfoss VLT micro drive FC 51 Name Plate

Image
In this Article, we are going to discuss about what specifications are mentioned on the Danfoss VLT micro drive FC 51 name plate sticker. Welcome to controls and systems blog page, The nameplate sticker is located on the top of each VFD drives and shows the ratings, serial number, warnings catalog number, and other relevant data for each unit. This nameplate sticker is mostly the same in the VLT model VFD drives, with only a few changes in the some VLT model VFD drives. 1 st ROW: ( TYPE CODE ) Position 1 - 3 [FC]-  is Product group, Possible choice is: Frequency converters, Position 4 - 6 [051]  is Series and product type, Possible choice is: Micro Drive, Position 7 - 10  [P]  is Power size, Possible choice is: 0.18 to 22 kilo watt. Position 11 - 12  [S2]  is Mains voltage, Possible choice is: S2 that means Single phase 200 to 240 Volt AC, T2 that means 3-phase, 200 to 240 Volt AC, T4 that means 3-phase, 380 to 480 Volt AC, Position 13 - 15  [E20]  i
Read More »

SIEMENS V20 VFD DRIVE FAULTS CODE LIST PART-1

Image
In this article  we are going to discuss about siemens v20 vfd drive fault Cause and Remedy for this  fault codes ( F1, F2 , F3 , F4 , F5 , F6 , F11 , F12 , F20 , F35 )   SIEMENS V20 DRIVE F1  -  FAULT:    Overcurrent CAUSE : Motor power (P0307) does not correspond to the inverter power (r0206). Motor lead short circuit Earth faults r0949 = 0: Hardware reported r0949 = 1: Software reported r0949 = 22: Hardware reported REMEDY : Check the following: Motor power (P0307) must correspond to inverter power (r0206). Cable length limits must not be exceeded. Motor cable and motor must have no short-circuits or earth faults. Motor parameters must match the motor in use. Value of stator resistance (P0350) must be  correct. Motor must not be obstructed or overloaded. Increase ramp-up time (P1120) Reduce starting boost level (P1312) F2  -  FAULT:  Overvoltage CAUSE : Main supply voltage too high Motor is in regenerative mode r0949 = 0: Hardware reported r0949 = 1 or 2: Software reported REMEDY
Read More »

SIEMENS V20 VFD DRIVE MAIN PARAMETERS LIST

Image
   SIEMENS V20 VFD DRIVE MAIN PARAMETERS LIST This Parameter Setting is Suitable for (  Manual ON/OFF Mode , Auto Frequency Mode , Pot meter Varying Mode ) its Deepened on (0-10)v Dc signal. SIEMENS V20 VFD DRIVE MAIN PARAMETERS LIST   Parameter Setting Description P0003 1 Standard: Allows access into most frequently used parameters P0010 30 Factory setting P0970 1 Resets all parameters P0010 1 Quick commissioning P0100 0 Europe [kW], motor base frequency is 50 Hz P0301 22 Rated motor KW [KW] P0304 415 Rated motor voltage [V] P0305 35 Rated motor current [A] P0307 22 Rated motor power P0308 0.82 Rated motor cosĪ† P0310
Read More »

Siemens RDG400KN Thermostat Parameter List

Image
In This Article we are going to see Siemens RDG400KN Room Thermostat Parameter List. RDG400KN Thermostat Control Parameter Heating only If you wish to change control parameters, proceed as follows: Press Left and Right button simultaneously for at least 3 seconds. Release them and within 2 seconds, press the Right button again for 3 seconds (The display will show P01). Select the required parameter by turning the rotary knob. Press button (OK). The current value of the selected parameter starts blinking and can be changed by turning the rotary knob. Press button (OK) to confirm the adjusted value, or (Esc) to cancel the change. If you wish to adjust additional parameters, repeat step 3 through 5, or press (Esc) to leave the parameter setting mode.
Read More »